Express

August 6, 2015
No Comments

The Express AS1735 And BCA E3 Compliant

The Express Also Comes With Australian Design Registration Certificates

EXPRESS LIFT the high performance goods only lift

Express lift is a goods lift of up to 2000kg rated load, specially designed for use in buildings with high turnover and movement of goods between floors – such as shopping centres, department stores, hypermarkets and industrial installations…

Express lift is a sophisticated and reliable high-performance machine, far superior to the standard platforms and goods lifts on offer.

Wide range of options available

Express lift is available with load capacities of 500, 1000, 1500 or 2000kg, with a full range of lift car configurations available for each model. Over and above our wide-ranging selection of standard solutions, Orbitz Elevators can also design the exact made-to-measure Express lift which you and your business need, adapting it to your precise specifications.

Flexible and straightforward installation

Express lift installation is designed to cause the minimum disruption to the day-to-day operation of your business, and does not require messy on-site building work. Express lift requires no extra space at all for its installation. No major construction work is necessary inside your building: the Express lift comes with its own freestanding modular structure, fully capable of bearing the weight of the whole system .

Rapid installation

Express lift installation is very fast: just ten weeks after signing the order, your Express lift will be in place and ready to start work.

No machine room, no pit and no shaft headroom

Express lift requires no machine room, no shaft headroom and no pit – everything needed for its effective operation is housed within its freestanding structure, including a 100mm shaft pit. Energy-efficient Express lift will reduce your operating costs: its energy consumption is significantly lower than that of conventional lift platforms.

Simple and safe to use

Transporting goods with Express lift is very straightforward and completely safe for the operative.

Durability and high performance

Express lift is a long-lasting installation designed to work intensively, reliably and efficiently over many years. It is a robust goods lift, equipped with sturdy and hard-wearing lift cars which guarantee the safe transport of goods. Many different options are available to adapt each Express lift to your particular needs: in-car buffer rails and kick plates, hard-wearing floor finishes in aluminium or steel chequer plate, manual shutter gates, picket gates…

EXPRESS lift is a lift designed exclusively for goods transport and is fully compliant with the EC Machinery Directive 2006/42/EC. The EXPRESS lift is not a passenger lift: no person should travel in the lift with the goods.

EXPRESS LIFT PRO: the specialist goods lift with attendant

EXPRESS lift PRO has been designed by applying special modifications to our best-seller EXPRESS lift PRO goods only lift specifically oriented to allow one or two competent attendants to accompany the freight safely and easily:

• The lift car has been equipped with a car operation panel which incorporates a constant pressure push button and emergency stop switch. The car operation panel can be equipped with a position display and voice synthesizer as an option.

• To switch on the attendant mode, a key switch has been included in the lift car to allow the attendant to operate the lift from inside the car.

• The lift can also be controlled by an automatic operation at landing.

• The attendant’s security is fully guaranteed by a category 2* full height light ray installed in the car entrance. The landing doors are supplied with vision panels to ensure total visibility. The lift also incorporates an alarm in case of entrapment and it can be equipped with a telephone as an option.

EXPRESS LIFT Specifications

EXPRESS LIFT PRO Specifications

Door Options

Optional extras

Access ramp

2 options:
• Painted metal sheet RAL 7032 Beige
• Aluminum checker plate finish

Guides length

2.5m

Landing doors

• Manual folding shutter gates
2 hour fire resistance in accordance with BS EN1634-1

• Manual single or double hinged with window
Finished in stainless steel AISI314.
UNE EN 81-58:2004 E120

• Manual single or double hinged with window.
Finished in stainless steel AISI316.
UNE EN 81-58:2004 E120

Car doors

Manual picket gates, with or without electrical interlock

Car roof

Galvanized metal sheet

Car floor

A choice of:
• Rubber
• Aluminum checker plate
• Steel checker plate.

Unintended car movement protection means

In-car buffer rails and kick plates
• Wood
• Stainless steel
• PVC

Push buttons

Keyed push buttons

“Out of Service” function

Key switch to block lift use

Lift car

Direct LED lighting

Ladder

Ladder with supports to access the rescue hatch.

Installation kits

Assembly tools are available both for the mechanical system
and for the modular structure.
• A Type
Where the clear space above the modular structure is over 500mm
• B Type
Where the space above is less than 500mm and the lift car depth less than or equal to 1500mm
• C Type
Where the space above is less than 500mm and the lift car depth is greater than 1500mm

• For the structure. Installation platforms.

EXPRESS LIFT PRO Optional Extras

Access ramp

2 options:
• Painted metal sheet RAL 7032 Beige
• Aluminum checker plate finish

Guides length

2.5m

Landing doors

• Manual folding shutter gates
2 hour fire resistance in accordance with BS EN1634-1

• Manual single or double hinged with window
Finished in stainless steel AISI314
UNE EN 81-58:2004 E120

• Manual single or double hinged with window
Finished in stainless steel AISI316
UNE EN 81-58:2004 E120

Car doors

Manual picket gates, with electrical interlock

Car floor

A choice of
• Rubber
• Aluminum checker plate
• Steel checker plate

In-car buffer rails and kick plates
• Wood
• Stainless steel
• PVC

Push buttons

Keyed push buttons

“Out of Service” function

Key switch to block BOXlift PRO use

Lift car

• Direct LED lighting
• Car light timer
• Hand rail
• Stainless steel
• Painted

Ladder

Ladder with supports to access the rescue hatch

Installation kits

Assembly tools are available both for the mechanical system and for the modular structure
• A Type
Where the clear space above the modular structure is over 500mm
• B Type
Where the space above is less than 500mm and the lift car depth less than or equal to 1500mm
• C Type
Where the space above is less than 500mm and the lift car depth is greater than 1500mm
• For the structure. Installation platforms.

Firemen operation function

When it is switched on, the lift will go to the evacuation floor.

Intercom between Car operating panel and control panel

Autodialer

• In car operating panel
• Inductive loop
• Bottom car telephone module.

Building Management System with alarm push button and position

Voltage free contacts

Alarm push button

• Pit
• On the top of the car

3 hours emergency car light

Voice synthesizer

Car operating panel engraving

• Logo
• Lift reference plate/CE mark
• Telephone instructions

Landing operating panel options

• Logo engraving
• 3” LCD Vertical display
• Keypad

Push buttons options

• M10
• US91.

Car operating panel options

• BCA1

150mm width x 585mm height x 2mm depth.
5,90 inches width x 23.03 inches height x 0,08 inches depth.

• BCA2
175mm width x 585mm height x 780mm depth.
6,89 inches width x 30,71 inches height x 0,98 inches depth.

The geared traction motor is housed in the upper part of the modular structure, removing the need for a separate machine room.

The inside of the lift car is finished with coated steel sheeting and is very durable and hard-wearing. Further car wall protection is available in the form of buffer rails and kick plates.

The freestanding modular structure incorporates a 100mm shaft pit, requiring a straightforward loading ramp. As an alternative, a 100mm pit can be built below the structure.

Dimensions guide

Both EXPRESS lift and EXPRESS lift PRO are designed to take maximum advantage of the available space and optimise its productive use.

NOTE: The widths and depths available are entirely independent of each other. Any depth can be combined with any width across all the rated load capacities.

In the case of a fully enclosed lift shaft: at the terminal landing there must be 600mm clearance above the door opening to allow access to the maintenance trapdoor. On the other floors, the structural opening must be at least the lift car headroom + 180mm.

oe_admin

Orbitz Elevators